Access Panels for Tiled Walls - Wall Access Covers/Panels/Hatches


What are these products?

Wall access panel designed to give access to concealed services within tiled walls.

"I am really pleased with how the Eagle Church project came out. The installation went very well. The 5000 Series floor hatch looks great. It pretty much "disappears" when closed and blends right in with the surrounding flooring. Thank you Chuck for all your help in selecting the correct Howe Green product, it was a pleasure working with you".

Carl Verh - Facility Manager Eagle Church Whitestone, IN


What type of wall finish are they suitable for?

These access panels are suitable for tiled walls


Where would I use this type of product?

Our wall access covers for tiled walls are suitable for use in both contemporary and existing projects.

They have been used in commercial premises, such as shopping malls, hotels, restaurants and office blocks across the world.

High quality combined with a concealed side hinge make the Waldor 50 wall access cover suitable for situations where frequent access is required to service voids. If less frequent access is required then the Tile-A-Door+ is the access solution you are looking for.

If you're not sure what product you need, please see our competitor product comparison chart.


Products Available / Specifications

Waldor 50 - Side Hinged Wall Access Panel for Regular Access - Stainless Steel

Waldor50 - Wall Access Cover/Panel/Hatch - Stainless Steel
Size

Minimum door size height 12" x width 12"
Maximum door size height 36" x width 24"

Cut out size = door size plus 1/4".*

Clear opening = door size minus height 1" and minus width 4 1/2".*

Tile and adhesive bed maximum thickness: 1/2".*

Wall access panels are manufactured to order
in 1/16" increments between the minimum and
maximum sizes listed to suit the tile module.

Materials

The Waldor 50 is manufactured from 17 gauge thick corrosion resistant stainless steel with a patented concealed hinge.

Options
  • The Waldor 50 panels can be fitted with either 'push pull' or security locks.

  • Stainless steel show edge for both the door and frame.

Tile-A-Door+ - Wall Access Panel/Hatch for Occasional Access - Zinc coated

Tile-A-Door+ - Wall Access Cover/Panel/Hatch - Galvanized-Steel
Size

The maximum area of door available is 1.72ft²
Example: 15 3/4" x 15 3/4" or 24" x 10 1/4".

Gap between the wall hatch and frame: 1/8".*

Cut out size = door size plus 9/16".*

Tile and adhesive bed maximum thickness: 3/8".*

Wall access panels are manufactured to order
in 1/16" increments between the minimum and
maximum sizes listed to suit the tile module.

 

Materials

The Tile-A-Door+ is manufactured from mild steel electro-galvanized sections and fitted with magnetic latches.

Options
  • Your Tile-A-Door+ can be fitted with either a budget/security lock or magnetic latch if required.

Need help? Call us on 239-689-5334

 

More info?


Request a call back

Email us

Download Howe Green Brochure